WallpaperWholesaler.com HACKER SAFE certified sites prevent over 99.9% of hacker crime. LIVE HELP
1-888-305-8020
------------------------  WALLPAPERWHOLESALER.COM   ----------------------------
Wallpaper, Wallpaper Borders, Blinds, Shutters, Shades & More
Shopping Cart My Account
   How To Install  | How To Measure   | Warranty  |   Free Shipping   |   Free Samples |
FREE SHIPPING** !   NO SALES TAX*!!!   Wholesale Prices!!!  SECURE SITE  


How to Measure for Window Blinds: Measuring Instructions

If you’re wondering how to measure for blinds, Wallpaperwholesaler.com has the complete instructions on how to measure for blinds. We have guidelines for your made to measure blinds for a perfect fit. Make sure your blinds fit your window properly with our instructions below.
First, before your install your made to measure blinds, make sure you read our how to measure for window blinds. Next, measure each window individually, as size variances are common. Record width first, then height (also referred to as length) to the nearest 1/8". Measure width from left to right, height from top to bottom, using a steel tape measure. Do not use a cloth tape.


mountsGuidelines For A Perfect Fit

 

Select your window fashion type for measuring instructions:

Horizontal Blinds and Fabric Shades

Inside mount:

 

 

See the Sill Depth Chart below for the sill depth needed for inside mounts and the minimum needed for the product to be flush mounted with the window front molding.

Casing Depth Requirements (inches)
For inside Mounting

Product

For Installation

For Flush to Front

1" Wood Blinds

1

2-1/4

2" Wood Blinds

1-1/2

3

Woven Woods

3/4

1-3/4

Roller Shades

3/4

Depends on Length

Window Shadings

3/4

3-1/4

Verticals

1-1/2

4-3/4

1" Mini Blinds

3/4

1-1/2

1/2" Mini Blinds

3/4

1-1/2<

 

Flush Inside Mount

The Valance does not have a Return. Mounts Flush with window molding. The mounting brackets will not be visible

 

 

Non Flush Inside Mount
Valance does not have Returns. The mounting brackets may be slightly visible from the side.



If the depth of your window does not allow for a flush inside mount
you may want to ask for Returns for your valance.
Click Here
for measuring instructions.

 

 

 

Horizontal Blinds and Fabric Shades

mountsOutside mount:

  • Outside mount blinds and shades are installed outside the window casing, covering an area larger than the window itself.
  • Measure the exact width to be covered. Be sure the measurement overlaps the window opening by at least 1-1/2" on each side (3" total overlap) to ensure light control and privacy.
  • Measure exact height to be covered, including desired overlap (typically from top edge of molding to bottom edge, or to top of sill if there is one).
  • The factory makes NO allowances on outside mount.

Outside mounts are more attractive if a valance with Returns is used. Many of our valances offer Returns

The Standard inside length of the returns are 2 1/2". If you prefer a longer or shorter Return, we will gladly customize the Return for you. Please call us Toll Free 888-305-8020 and our friendly knowledgeable sales people will help you with Special Requests.

Vertical Blinds

Inside mount:

  • Inside mount blinds are installed inside a window casing or door, or wall to wall in a room. The window casing must be at least 2-3/4" deep for track flush mount or 3-3/4" deep for louvers flush mount. Otherwise, an angle bracket may be necessary.
  • Measure the exact inside width of window casing from one inside edge to the other in three different places. Record the narrowest measurement.
  • Measure the exact height in three different places from top edge of opening to bottom, or top edge of sill if there is one. Record the shortest measurement.
  • Do not take any deductions for clearance. The factory will take necessary deductions for a perfect fit.

Vertical Blinds

Outside mount:

  • Outside mount blinds are installed outside the window casing, covering an area larger than the window itself.
  • Measure the exact width of window, including frame if there is one. Add 3" for each side (6" total overlap) to ensure light control and privacy.
  • Measure height of window from top edge of molding to bottom edge, or to top of sill if there is one. Add 3" to allow for adequate mounting area above the window.
  • If blind extends to floor (i.e., to cover patio door), measure height in three places, take the smallest measurement and deduct at least 1/2" for clearance so the louvers don't touch the floor.
  • The factory makes NO allowances on outside mount.

 

Florentine Sheers



Measuring for Shutters

Before you begin measuring, choose whether the shutter will be mounted inside the window opening (IM) or outside the window opening (OM). Inside mount shutters attach and hang inside the window opening for a flush, clean look that highlights decorative window trim. Outside mount shutters hang outside the window opening, either on the window trim or above and beyond the window frame. Outside mounting can make a window appear larger, or hide an unattractive window. To maintain a tilt and clean feature on your windows you may need to use an outside mount.





If the diagonal measurements inside your window opening vary by more than Ό” we strongly suggest an outside mount (see illustration to left).




Outside Mount
Windows without Molding or Trim
(Installation on Wall)



First measure the width of the window opening in three places – top, middle, and bottom. Add 2 inches to the widest measurement and order this width. Next, measure the height of the window opening in three places – left center and right. Add 2 inches to the tallest measurement and order this height.


NOTE: You must add 2” to both width and height to allow for the shutter frame.

Outside Mount
Windows with Molding
(Installation on Trim or Molding)



First measure the width of the window molding in three places – top, middle, and bottom. Order the widest measurement. Next, measure the height of the window trim in three places – left, center and right. Order the tallest measurement. The size ordered for this mounting option will include the shutter frame. (Please note that the installation is easier if the window molding is at least 1 1/8” wide.)

Outside Mount
Window with Molding
(Installation Surrounding or Beyond Molding)



First, measure the width of the outer edge of the molding in three places – top, middle and bottom; add 2 1/4” to the widest width. Order this width. Next, measure the height of the outer edge of the molding at three places – right, center and left; add 2 1/4” to the tallest height. Order this height.

NOTE: You must add 2 1/4” to both the largest width and height so the shutter frame will clear the molding on all sides.

Inside Mount
(Installation Inside Window Opening)



First measure the width of the window opening in three places – top, middle, and bottom. Order the narrowest or smallest measurement. Next, measure the height of the window opening in three places – left, center and right. Order the shortest measurement.

NOTE: A minimum window depth of 2” is needed for an inside mount to be installed flush with the surrounding wall or trim. This depth is not necessary if the shutter is to protrude slightly out from the window opening. The factory will take the appropriate deduction in width and height. DO NOT MAKE ANY DEDCUTIONS or ALLOWANCES.


More Measuring Tips
Always use a metal tape measure for accuracy and record measurements to the nearest 1/8” of an inch.
Please do not take any allowances: the factory will make all necessary deductions.
Always measure each window you plan to cover. Windows of different sizes can appear deceptively similar.

  Wallpaper & Fabric  Blind & Shutters  Contact us 
Terms of Use  Terms and Conditions of Sale 
Online Privacy Policy    Sitemap 


About SSL Certificates

We accept all major credit cards via Secure Site Encryption 

We Accept All Major Credit Cards and Check Cards.


 HACKER SAFE certified sites prevent over 99.9% of hacker crime.


Click Here
For Hours		 *ONLY Tennessee Residents Pay Sales Tax
** Free UPS shipping on all shipments within the Continental USA, except oversize packages, expedited shipments, commercial goods and orders that total less than $60.00


© 2000 - 2009 William D. Light d/b/a Wholesale Wallpaper,
www.wallpaperwholesaler.com/ www.wallpaperwholesalers.com/ www.gowalls.com .